Download the Axia IP Driver Multichannel v2.11.0.10 (High-Performance Audio-over-IP Routing Software) from this link…
Overview of the Software
Table of Contents
Axia IP Driver Multichannel v2.11.0.10 is a professional-grade audio-over-IP (AoIP) driver developed by Axia Audio (a brand of Telos Alliance). This software enables broadcasters, sound engineers, and content creators to transmit and receive multiple uncompressed audio channels over standard Ethernet networks using the Livewire+ protocol.
Unlike traditional point-to-point analog or digital connections, the Axia IP Driver Multichannel software leverages existing IP network infrastructure to reduce cabling complexity, lower costs, and increase routing flexibility. It is a core tool for radio stations, podcast studios, live event broadcasters, and post-production facilities that require reliable, low-latency audio transport.
This driver acts as a virtual sound card, allowing any Windows-based audio application (such as automation systems, DAWs, or encoders) to send and receive dozens of audio streams directly over an IP network. Version v2.11.0.10 brings performance refinements, improved compatibility, and enhanced stability for mission-critical broadcast environments.
Key Features
-
Multi-Channel Audio-over-IP Transport
Supports up to 64 transmit and 64 receive audio channels simultaneously over a single Gigabit Ethernet connection, eliminating the need for multiple sound cards or dedicated audio snakes. -
Livewire+ Protocol Compliance
Fully compatible with Axia’s Livewire+ AoIP ecosystem, enabling seamless discovery, clock synchronization, and routing with Axia mixing consoles, nodes, and third-party Livewire+ devices. -
Low-Latency Streaming
Delivers sub-5 millisecond latency when used on optimized networks, making it suitable for live on-air broadcasting, remote interviews, and real-time monitoring. -
Sample-Accurate Synchronization
Uses PTPv2 (IEEE 1588-2008) for network-based clock synchronization, ensuring phase-aligned multichannel playback and recording across multiple devices. -
Broad Format Support
Handles PCM audio at sample rates of 44.1 kHz, 48 kHz, and 96 kHz with bit depths up to 24-bit. Supports mono, stereo, and surround configurations. -
Virtual Audio Device Integration
Installs as a native Windows WDM/ASIO driver, allowing any audio application (e.g., Adobe Audition, DALET, WideOrbit, or vMix) to route audio via IP without hardware modification. -
Redundant Network Paths
Supports dual-homed network interfaces for failover protection, ensuring broadcast continuity even if one network switch or path fails.
What’s New in Version 2.11.0.10
The v2.11.0.10 release focuses on reliability and compatibility:
-
Enhanced Windows 11 Compatibility – Fully tested on Windows 11 Pro and Enterprise (22H2 and later).
-
Improved ASIO Driver Stability – Fixes occasional dropouts when running at 96 kHz with 64 channels.
-
Updated Livewire+ Discovery – Faster enumeration of Axia consoles and nodes on larger subnets (up to 254 devices).
-
Security Patch – Removed legacy TLS 1.0 dependencies; now uses TLS 1.2 for optional license validation.
-
Lower CPU Overhead – Optimized packet processing reduces CPU usage by approximately 15% under full load.
System Requirements
| Component | Minimum Requirement |
|---|---|
| Operating System | Windows 10 Pro (64-bit) or Windows 11 Pro/Enterprise |
| CPU | Intel Core i5 (8th gen or newer) or AMD Ryzen 5 |
| RAM | 8 GB (16 GB recommended for 64+ channels) |
| Network | Gigabit Ethernet port (Intel PRO/1000 series recommended) |
| Storage | 100 MB free space for driver + optional logging |
| Other | DHCP or static IP; PTP-aware network switch (e.g., Cisco SG350 or Axia-compatible) |
Note: The software does not function over Wi-Fi due to latency and jitter requirements. A wired, managed Ethernet switch is mandatory.
Installation Guide
Step 1: Download and Prepare
Download the official Axia_IP_Driver_v2.11.0.10_Setup.exe from the Telos Alliance support portal. Verify the SHA-256 checksum if provided.
Step 2: Disable Windows Audio Enhancements
To prevent conflicts, open Sound Settings > Device Properties > Additional Device Properties > Enhancements and check “Disable all enhancements.”
Step 3: Run Installer as Administrator
Right-click the installer and select Run as Administrator. Accept the license agreement (which prohibits reverse engineering or unauthorized redistribution).
Step 4: Select Driver Mode
Choose between:
-
WDM mode – For general Windows applications.
-
ASIO mode – For professional DAWs requiring low latency.
Step 5: Network Configuration
Assign a static IP to the dedicated NIC. The driver will auto-discover Livewire+ streams if the subnet allows multicast traffic (224.0.0.0/4).
Step 6: Reboot
Restart the system to finalize driver installation.
How to Use the Software
Routing Audio from a DAW to an Axia Console
-
Open your DAW (e.g., Reaper or Adobe Audition).
-
Select Axia IP Driver as the ASIO device.
-
In the Axia IP Driver Control Panel, map DAW output channels (e.g., 1-8) to Livewire+ streams.
-
On the Axia console, subscribe to those stream numbers.
-
Audio will now appear on the console faders without physical cables.
Setting Up a Remote Broadcast Feed
-
Install Axia IP Driver on the remote laptop and studio server.
-
Configure both on the same VLAN or VPN with multicast routing.
-
On the remote unit, send a microphone input to stream 101.
-
At the studio, receive stream 101 and route it to an input channel in your automation system.
Best Use Cases
-
Radio Station Studio-to-Transmitter Links (STL) – Replace analog leased lines with IP transport.
-
Multi-host Podcasts – Record 8+ microphones directly into a DAW over IP from different rooms.
-
Live Sports Broadcasting – Send 32 channels of crowd, commentary, and effects from a stadium to a production truck.
-
Post-Production Voiceover – A voice talent at home connects to studio monitors via VPN and Axia IP Driver.
Advantages and Limitations
Advantages
| Benefit | Explanation |
|---|---|
| Cost-effective | Uses existing Ethernet cabling and switches instead of expensive MADI or analog multi-core cables. |
| Scalable | Add channels by software configuration, not hardware purchases. |
| Interoperable | Works with any Livewire+ compliant device (Axia, Telos, 25-Seven, Linear Acoustic). |
| Remote Capable | With proper QoS, can operate over VPNs or dedicated WAN links. |
Limitations
| Limitation | Consideration |
|---|---|
| Network Dependent | Requires managed switches with IGMP snooping and PTP support. Consumer switches cause dropouts. |
| Windows Only | No native macOS or Linux version. |
| License Required | A paid license unlocks full channel count (trial limited to 4×4 channels). |
| Learning Curve | Audio-over-IP concepts (multicast, PTP, VLANs) are needed for advanced setups. |
Alternatives to Axia IP Driver
| Software | Key Difference | Best For |
|---|---|---|
| Dante Via | Consumer-friendly, works on any Ethernet, but higher latency (10-25 ms) | Small studios, corporate AV |
| Ravenna/Apt-x | Open standard, used by Lawo and ALC NetworX | Large broadcast facilities with mixed AoIP protocols |
| SoundGrid (by Waves) | Focus on real-time plugin processing, not routing | Live sound and monitor mixing |
| VB-Cable + NDI | Free but complex; no automatic sync | Budget setups, experimentation |
For existing Axia users, Axia IP Driver remains the most tightly integrated and lowest-latency option.
Frequently Asked Questions
1. Is Axia IP Driver Multichannel v2.11.0.10 free?
No, it requires a paid license from Telos Alliance. A 30-day trial with 4×4 channel limit is available for testing.
2. Can I use Axia IP Driver with non-Axia equipment?
Yes. Any device that supports Livewire+ or AES67 (with compatibility mode) can exchange streams. However, advanced features like source naming may be limited.
3. Does this software work over the internet?
It is designed for LANs. With a high-quality VPN (WireGuard or Tailscale) and proper QoS, it can work over WANs, but latency will increase. It is not recommended for live on-air use over the public internet.
4. What is the maximum number of channels in v2.11.0.10?
Up to 64 transmit and 64 receive channels (128 total) at 48 kHz/24-bit. At 96 kHz, the maximum is 32×32.
5. Will this driver work on Windows Server?
It is not officially supported, but some users report success on Windows Server 2019 with the Desktop Experience installed. No technical support is provided for server OS.
6. How do I update from an older version?
Uninstall the previous version via Windows Apps & Features, reboot, then install v2.11.0.10. Your license file remains on the system unless manually deleted.
7. Does Axia IP Driver support surround sound?
Yes. You can route 5.1 or 7.1 surround streams by grouping channels (e.g., channels 1-6 for 5.1). The driver treats each channel independently.
Final Thoughts
Axia IP Driver Multichannel v2.11.0.10 is an essential software component for any broadcast facility already invested in the Axia Livewire+ ecosystem. It transforms a standard Windows PC into a powerful multichannel AoIP node, eliminating the need for dedicated audio interfaces and simplifying complex routing.
While the software demands a properly configured network and a paid license, the return on investment comes from reduced cabling costs, faster setup times, and the ability to scale from a small podcast studio to a 64-channel live broadcast truck. For engineers and operators seeking studio-grade, low-latency audio-over-IP, this driver remains a top-tier, reliable choice.
Premium Software Support Service
If you need professional help with software installation, setup, or technical configuration, our team is available to assist you.
Contact & Support
For quick assistance and latest updates, connect with us using the links below:
🔹 Direct Telegram Support
https://t.me/PlayoutKing
🔹 Official Telegram Updates Group
https://t.me/yourgroup
Service Policy
- Remote testing available through AnyDesk before confirmation.
• Verify the setup and performance before completing the order.
• Support available for single or multiple systems.
• Step-by-step guidance to ensure smooth installation and working environment.
Our goal is to provide reliable technical assistance so your software runs smoothly without interruptions.
